Jeep now idles very good. Seems to be fixed. Just wanted to thank everyone for the help. I bought the special metering rod holding tool carter...
I've heard the carb kits supplied now have the wrong parts for our carbs? Which parts are wrong specifically? Maybe the new idle jet tube that is...
That's a good idea, just went and tried it several times and made no difference
I will get it ordered
I looked for vacuum leaks and found none using starter fluid and using smoke machine. It kicks up the slightest bit at throttle shaft with...
59 cj5 F134 with carter yf938sd. Last 10 years has ran perfect no issues. Late fall it started idling poorly and lots of I'd call it black smoke...
I'd upload pics but I can never get them small enough for max 1 mb as site wants?
I thought I would try disconnecting fuel supply line at carb and run it just with what was already in the carb bowl. IT RAN PERFECT. NO ISSUES...
When running when i look down the bore of the carb i can see small intermittent dribbles of fuel coming out the small hole next to the check ball...
I've tried everything again today. And I tried vacuum gauge found to be about 5 inches vacuum not good. Disconnected pcv and got vacuum straight...
I didn't try Baxters. I always forget they exist
I tried napa autozone and oreillys all only showed a listing for external resistor required coil. And none had a listing for the resistor itself....
59 cj5 F134 with carter yf938sd I've driven nice weather driving for about 10 years. No issues. Start of this spring after winter storage seems to...
Separate names with a comma.