1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1955 CJ-5 Restore

Discussion in 'Builds and Fabricators Forum' started by dafeeesshh, May 26, 2010.

  1. May 26, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    hello everyone I have been going at this project for about 9 months now and I am severely behind schedule and way above my budget, like all jeep builds, I was 17 when i started this build hopefully finish it before I am 19. This is my first restore so be nice. Here is a list of things i have done so far that i can remember.
    new wheel bearings
    minor rebuilds on Transfercase and transmission
    Almost everything knew on the Brakes
    Fixed rust holes in the floor.
    i will tray to add new photos everyday light room and windows 7 having problems working together.

    I don't have Much photos from when I got it, by they way i paid 850$ for it:oops:
    Friend of mine helping take it apart.
    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]
     
  2. May 26, 2010
    clay

    clay Driving

    Hopkinton, MA
    Joined:
    Aug 14, 2005
    Messages:
    338
    Looks like a good Jeep to start with. The problem is you have a budget just throw out that idea and fix things as you can. Good luck
     
  3. May 27, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    Here are some pictures of the tear down.

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]
     
    Last edited: May 27, 2010
  4. May 27, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    Never thought of that save that one for the next project, hopefully a 47 Chevy Thrift Master.

    Once i got the body off i painted the frame and axle with POR-15 it actually looks kinda good.

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]

    This was took me probably a month and a half to get this far thought i was making good time. :rofl:
     
    Last edited: Sep 14, 2010
  5. May 27, 2010
    double R

    double R Member

    Reseda, CA
    Joined:
    Mar 18, 2003
    Messages:
    332
    looks like an m38a1 except for maybe the grill...
     
  6. May 27, 2010
    Mike S

    Mike S Sponsor

    Cameron Park Ca.
    Joined:
    Oct 6, 2009
    Messages:
    811
    And the frame. No gun mount.

    Tub-----m38a1.
     
  7. May 27, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    ya I think the tub is M38A1 and a civi frame. I heard that the early production numbers got M38A1 surplus tubs. some even got military frames.
     
  8. May 27, 2010
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,189
    Early frame though, factory shackle reversal like my '56.
     
  9. May 27, 2010
    dvw86

    dvw86 Member

    Eastern Washington
    Joined:
    Sep 23, 2007
    Messages:
    191
    Yep, I have the same frame on my '55 CJ5. It has the M38A1 shackle reversal but no gun mount. Yours is in a little better condition than mine was.
     
  10. May 27, 2010
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    743
    Has the civvy battery tray. Grill and dash not A1 and neither is that tailgate. Early 5's had battery box, but not sure if they had the NATO slave mount. My A1 did not have the cowl tag from Willys, but it was mounted to the wheelwell. Do you have a serial number riveted to the wheel well behind one of the seats? Interesting mix of parts. Can't wait to see it finished!
     
  11. May 27, 2010
    Mike S

    Mike S Sponsor

    Cameron Park Ca.
    Joined:
    Oct 6, 2009
    Messages:
    811
    Old Jeeps, like old VWs have the amazing ability to get cobbled together from a vast array of parts----and they usually fit just fine:D
     
  12. May 27, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    None behind the seats, the serial plate was on the firewall, you can see it on the driver side picture when the fenders are still on.

    the serial number is 57548-13692

    I figured that out pretty fast, PO decided if it doesn't fit it just need more washers.
     
    Last edited: May 27, 2010
  13. May 29, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    here is the frame, i painted the axles with POR-15.

    [​IMG][/IMG]

    [​IMG][/IMG]

    Here is the body i think it was a school project for High school students one where they did a lot of bondo work because the whole body was covered in bondo even the straight metal.

    [​IMG][/IMG]

    there was a spot in the front of the tub where the bondo had to be an inch thick.:rofl:
     
  14. May 29, 2010
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    Looking good!!!!
     
  15. May 29, 2010
    Lawrenceu

    Lawrenceu New Member

    Mobile, AL
    Joined:
    Oct 20, 2009
    Messages:
    34
    Snow on Memorial Day Weekend, that is just wrong. I'm glad I live in Dixie.
     
  16. Jun 1, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    those pictures are from months ago, just been putting up pics as i find time.
     
  17. Jun 1, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    gave up on sanding the whole body myself and paid someone to sand blast it.

    [​IMG][/IMG]

    painted the under-body with por-15 then top coated it with Herculiner.

    [​IMG][/IMG]

    [​IMG][/IMG]

    Lined the interior with herculiner not to sure if i like it more then if i would of just painted with regular paint.

    [​IMG][/IMG]
     
  18. Jun 2, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    got the engine painted, did the trannsmision to but don't have pictures right now.

    Before[​IMG][/IMG]

    After

    [​IMG][/IMG]

    picture sucks i will try to add a better one tonight.
     
  19. Jun 5, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    The transmission after paint.

    [​IMG][/IMG]

    Frame with new tie rods and brake lines.

    [​IMG][/IMG]

    [​IMG][/IMG]

    Did a quick test of what it will look like before i pull the body off for wiring.

    [​IMG][/IMG]
     
  20. Jun 12, 2010
    dafeeesshh

    dafeeesshh Member

    Colorado
    Joined:
    Apr 21, 2010
    Messages:
    138
    Got some goodies in this week trying body work for the first time. Goal is to have primer on next weekend.

    [​IMG][/IMG]

    Painted the gas tank and just some random pictures.

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]

    [​IMG][/IMG]
     
New Posts