55 speedo cluster

I have tried to search, but all the links I come across are broken due to the tech section still be updated. Any have a diagram of what goes where on the back of a 55' 0-10 speedo?? I have what looks like a regulator with two posts that is mounted to the back of the gauge that needs to have power supplied to it before being distributed to the other gauges (ie: fuel/temp) any help, thanks

 

Give Lynn PM

 

Thanks Duke!!

 

Anyone? Speedo works, sending units are good, but I can not get the fuel or temp in either of my two gauges to work.

 

thought about it but decided not to bother you admin guys. I can re search and try to find a couple that sounded like they had good potential. Thanks!

 

Not sure if this applies to you or not - Try this - it's mine from a 66 (I should have documented this when I re-wired mine!) - I think it's right but hopefully someone will correct me if it's wrong.

Notes:
1. The picture is upside down (i.e. the bottom of the pic is the top of the cluster)
2. I am running a Delco 12SI - not the original Generator/Alternator
3. The FSM sometimes shows 2 illumination lights or cluster lights - I only have one, or maybe #6 is a cluster light? Just thought of that.



Here's a couple of other posts that helped me:

http://www.earlycj5.com/forums/showthread.php?t=60248

http://www.earlycj5.com/forums/showthread.php?t=67796

 

Are you staying 6 volt or converting to 12?

 

Also good info here as to what the "little box" does http://www.earlycj5.com/forums/showthread.php?t=32774&highlight=speedo+cluster

 

Thanks guys, Mine does have that regulator on it and after reading that last link from Sid ( I had just found that one myself) it sounds like I am on the right track. The JEEP already has a painless kit installed so after reading that I am ok to leave the factory guages in as long as that regulator is working right?

Davis, thanks a ton for that, that made the light hookup alot clearer even though mine is a touch different (55')