1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Official "What The Heck Is This?" Thread

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Feb 19, 2016.

  1. Apr 20, 2022
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,460
    Naaa. Those are the stock clutch "bind up" posts that make sure you can't shift gears if you get twisted up good. BTDT
     
  2. Apr 20, 2022
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,698
    HEY John.....me too, a long time ago :oops:
     
  3. Apr 20, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754

    My Dad once got stuck against a tree and couldn't shift out of forward and into reverse, had to cut the tree down with a hand ax to escape.
     
    Lockman likes this.
  4. Apr 20, 2022
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,460
    My most twisted up episode was saved by the overdrive. It was the only thing I managed to get into neutral. I was so twisted up it killed the 225. McKelvey Lake trail, late 60's. Way before it was "found".
     
  5. Apr 20, 2022
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    I was twisted and stuck in gear a couple years ago in Colorado. Hitting the shifter with the palm of my hand I broke the threaded part with the ball off. I had to tape a rag to the top of the shifter for the last couple days there.
     
  6. Apr 20, 2022
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,698
    Tee Hee....... I love my auto, but I'm an A$$ :flag:
     
  7. May 7, 2022
    Eric

    Eric Member

    CA
    Joined:
    Apr 13, 2006
    Messages:
    129
    Does anyone make an aftermarket spring?
     
  8. May 7, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Good chance to experiment with a hacksaw blade and some kitchen counter heat-treating and tempering.
     
    tripilio and Eric like this.
  9. May 13, 2022
    KevH

    KevH New Member

    Contra Costa...
    Joined:
    Dec 31, 2018
    Messages:
    6
    I'm trying to ID what engine is in this 1966 CJ5 Tuxedo Park Mark IV. These are pics/video sent to me by the owner. It's located a couple hours away and I may take a drive to go look at it. When I asked the owner she said it was a "AMC V6." I'm assuming it's a Buick, but it doesn't look like a stock 225 to me (but nothing on this Jeep looks stock).

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. May 13, 2022
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If it's a 225, you'll need to look at the casting numbers to confirm. The technical library here has a list of casting numbers for the Jeep/Buick V6s.

    Lots else is different from a '66 with a V6. Core support/grill and radiator have been changed. Brake booster indicates suspended pedals, which are not original. Power steering was first available from the factory in 1972. A '66 V6 would have had the oil bath air cleaner http://www.earlycj5.com/xf_cj5/index.php?threads/125390/ Valve covers look wrong for a 225. Distributor position is right for a Buick V6, but it could be a later version.
     
  11. May 13, 2022
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,626
    From the valve covers it looks like a 70's vintage Buick 231 V6 (a descendant and bolt in replacement for the 225 Dauntless). Normally a 231 would have an HEI distributor. With the red cap and lack of vacuum advance it might be an aftermarket Mallory. If that's the case it's probably an even fire 231.

    Tim is right about several non-original mods with power brakes and suspended pedals, 1972 and up grill, and power steering.
     
  12. May 13, 2022
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,698
    Yep .....It could be a 231 , certainly not OEM , though . one way of quick ID is if it has a freeze plug on the front of the DS head , behind the PS pump. No way of truly telling without finding a block casting # . I hope you get it for a good price . Appears to have a lot of rust.
     
    Last edited: May 13, 2022
  13. May 13, 2022
    KevH

    KevH New Member

    Contra Costa...
    Joined:
    Dec 31, 2018
    Messages:
    6
    In pictures it doesn't look super rusty. Just dirty and I think the original color was Indian Ceramic (kind of a pink-red color) that was painted over a couple times. I wouldn't want to pay more than $3800 for it.

    The current owner sent me a video of it running (if that helps):
    https://drive.google.com/file/d/1EZsNBxYlh39-WMnFKbH7hRK4puSOO2IV/view?usp=sharing
     
    Last edited: May 13, 2022
  14. May 30, 2022
    Robert Hanna

    Robert Hanna New Member

    Abilene, TX
    Joined:
    Apr 22, 2022
    Messages:
    16
    Okay gear heads, I need some help identifying this steering housing assembly. I don't think it is original. I know the tires and rims are not. I'm assuming the previous owner changed out the steering to a beefier system to handle the larger tires?

    Thanks!
     
  15. May 31, 2022
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,354
    That is a Saginaw steering conversion, a common and very desirable upgrade. The previous owner did the right thing if it was done correctly. There are many threads and posts about it.

    http://www.earlycj5.com/xf_cj5/index.php?threads/17911/

    https://www.advanceadapters.com/jeep-steering-kits-2
     
    dozerjim and Lockman like this.
  16. May 31, 2022
    Robert Hanna

    Robert Hanna New Member

    Abilene, TX
    Joined:
    Apr 22, 2022
    Messages:
    16
  17. May 31, 2022
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Anyone recognize these brackets? I just got my seats back from the restoration upholsterer, and they were attached to the bottom of the drivers seat on my 1966 CJ 5A. They have holes that the bolts protruding from the sliding mechanism drop right into.
    F8984389-6D0A-45F5-AFFC-B4C56C2F8174.jpeg
    I couldn’t figure out a way to use them to install the seat onto the bracket that goes over the fuel tank…and they are longer than the bottom
    of the seat, and the seat bottom bolts dropped right into the existing round bar bracket. Thanks to Rubicloak here’s the seat diagram:
    261879A6-CBA0-4951-9DED-3C84591649B5.jpeg

    So I’m not sure they are even from a jeep. Anyone have any ideas?
     
  18. Jun 24, 2022
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    I think those brackets you have are for the earlier Tux seats that use springs instead of the foam (foam seats were new for the ‘66 model year). The correct seats and mounts for your ‘66 are shown in Rubicloak’s diagram.
    The ‘64/‘65 Tux used a front crossbar (support) with 2 square plates welded on, and separate riser brackets that bolted to the bed floor behind the tank. Your bars connected the two, and gave a mounting plate for the slide adjuster. The early Tux used a unique slide adjuster where the handle sticks out the left side by the fuel filler.
    When I get back to the Keys, I will look at a set I have to try to verify if I remember correctly.
    -Donny
     
  19. Jul 2, 2022
    Savemycj

    Savemycj New Member

    Indiana
    Joined:
    Jul 2, 2022
    Messages:
    6
    Hey guys, just got a “new” 1959 CJ5, not running. It sat in a woods for about 5 years. I’m troubleshooting the ignition and I would like to get new points, cap, and rotor. While looking for engine info I discovered this isn’t the 134 engine. Does anyone know what this is? I know it’s a Ford, their logo is on the intake manifold.
     

    Attached Files:

    Twin2 likes this.
  20. Jul 2, 2022
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Last edited: Jul 2, 2022
New Posts