1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where To Find Parts

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, Sep 27, 2004.

  1. Aug 22, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I looked at Faxon - 1962-1973 Jeep CJ, DJ, and Jeepster Parts Book Reprint

    I'd be tempted to buy it, but it's hard to justify when I'd only use it for playing on the internet.

    Maybe enough requests to Faxon would convince whoever the publisher is to bring it out on CD-ROM, like the '74-80 book. Here's the '74-80 book More Information for DETROIT IRON DCDC114 I'd ask "Detroit Iron" to put the earlier book out on CD-ROM. They have a phone number ... Factory Shop Manuals for Ford, General Motors, Chrysler and Jeep | Detroit Iron
     
    Last edited: Aug 22, 2020
  2. Dec 7, 2020
    Michael Wedin

    Michael Wedin Member

    Sweetwater, TX
    Joined:
    Mar 20, 2020
    Messages:
    64
    Got an old push button for my glove box from BC vintage Jeeps in Delta Colorado. Bob Donovan keep a lot of parts Jeeps (720) 469-1416. The early cj5's are different than the mid to later ones, but I think they all will work. The early cj's do not have an eschution(ring) around the botton
     
  3. Dec 28, 2020
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    Anyone know where to find a clutch release seal boot for a 65 CJ5 with a T90 trans? Has been upgraded to a 225 V6. Kind of an obscure part to look for and I am having no luck with my normal "obscure" parts dealers. Appreciate any help on this...
     
  4. Dec 28, 2020
    45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Naches, WA
    Joined:
    Mar 31, 2007
    Messages:
    1,103
    Try Summit. They list a Crown Automotive clutch release arm boot.
     
    jeraldt likes this.
  5. Dec 28, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If Crown makes it, try Quadratec. They are the the single largest retailer of Crown merchandise. If they don't have it. call the Crown warehouse in Canton MA.
     
    jeraldt likes this.
  6. Dec 28, 2020
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    I saw that online, but unfortunately none of them show applications prior to 72, and none of the boots show that they will work with a 225 V6. If they listed measurements, I could figure it out, but they dont do that either unfortunately.
     
  7. Dec 28, 2020
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    Thanks Tim. I will give that a try.
     
  8. Dec 28, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I think your T-90 and conversion is probably a distinction without a difference. Anyway, if you continue to have trouble, possible you could move this to a thread in the regular forum.

    With a T-90, there are two ways you can connect to a 225. You could have an aftermarket bellhousing adapter. In that case, the maker of the adapter would have used some available part to cover the hole. Or, you could have a plate adapter that uses the Buick 225 bell housing - two pieces. This is the same method Jeep used though 1970, though their adapter is different.

    I would expect this (and likely the 1-piece bell too) to use the Buick factory part, which should be easy to obtain. At worst, you could ask at TA Performance about a boot for a BOP (Buick-Olds-Pontiac) bell housing.

    https://www.summitracing.com/parts/pio-ca-96/make/buick/model/skylark/year/1970
     
    Last edited: Dec 28, 2020
    jeraldt likes this.
  9. Dec 28, 2020
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    Thank you. Its been a real cluster so to speak. The cj5 originally had the 4 cyl. But someone along the way put a 327 sbc in it (farm conversion). So it appears to have advanced adapters conversion on the transmission side, and the input shaft has been changed out. With a stock 226 V6 bellhousing it all works. So I will bet the skylark boot link above would work out for the frankenjeep.
     

    Attached Files:

  10. Dec 29, 2020
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    I ordered that up and we will see if it works. From what I can tell it should be fine. Thanks Again
     
  11. Jan 4, 2021
    jeraldt

    jeraldt Member

    Spokane Wa
    Joined:
    Feb 13, 2018
    Messages:
    55
    I just wanted to close out this question with a final answer so its here in case anyone needs to know. The suggestion above DID work (thank you Tim) for the standard 225 bellhousing. The dust boot below for the 1970 skylark worked just fine. Appreciate all the help on here, and hope this answer helps someone else down the road.

    https://www.summitracing.com/parts/pio-ca-96/make/buick/model/skylark/year/1970
     

    Attached Files:

    Last edited: Jan 4, 2021
    Desertdog48, Hellion and Fireball like this.
  12. Jan 10, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Can someone please point me to a source for the 71 CJ5 factory parts catalog that would have the part numbers. Thanks in advance.

    Matt
     
  13. Jan 10, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
  14. Jan 10, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Thank you timgr. Just ordered it.

    Matt
     
  15. Jan 10, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    NP. Glad I could help!
     
  16. Feb 8, 2021
    Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    East Tennessee
    Joined:
    Feb 8, 2021
    Messages:
    1,620
    Timgr,

    "With a T-90, there are two ways you can connect to a 225."

    There is a third way without an adapter.

    I have owned two Jeeps, one a 51 M38 I had 30 years ago, the other a 67 CJ5 I just bought with the 225 and a T-90 attached without an adaptor.

    The M38 of course was a conversion from the L134 engine, and this CJ5 is a conversion from the F134, as it does not have the brakes which came with the V6 option package.

    I did not do either of these conversions, but on both Jeeps a BOP bell housing was mated to the T-90 without an adaptor. I have not studied this CJ5 much yet, since I just got it home yesterday, but from what I recall of that M38 setup I believe you may have to drill and tap two holes. The long input shaft as used in the Willys trucks, and wagons has to be used if the T-90 came out of a Jeep with the four cylinder F134 or L134.

    Most of the stock Dauntless CJ5s I have seen had the T-86 transmission mated at the factory to the bell housing with an a plate adaptor. I am certainly no expert, being rather new to the CJ5 world, but I did not know that any of the CJ5s with the V6 option came with the T-90.
     
  17. Apr 5, 2021
    WPcj5

    WPcj5 New Member

    Tennessee
    Joined:
    Apr 5, 2021
    Messages:
    8
    My 1970 cj5 came with a single-shifter d18, but was missing the shift lever. Ive been looking everywhere to find one of these shift levers but came up short. Does anyone know who might sell one? Image for reference. I'd prefer to save the money and time which would go into converting it to a two-stick.

    Edit: I was referred to Willys Works by mike from Kaiser Willys. Now I have another question though, is it possible to find the brass bushing which goes inside the shifter anywhere? Am I better off having one made at my local machine shop?

    [​IMG]
     
    Last edited: Apr 5, 2021
  18. Apr 20, 2021
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Post a WTB in the classified section. I’ll bet some junk is sitting around with a good shifter.
     
  19. May 6, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Does anyone happen to know the correct ARP bolt for the application of Buick V6 Dauntless clutch pressure plate to flywheel?

    EDIT: ARP wrote and said to measure and replace, and I found that these work:
    130-2201

    FYI ARP wrote me back and gave me the part number for the Flywheel to Crank bolts:
    240-2801
     
    Last edited: May 9, 2021
  20. May 9, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Anyone know of an oil pressure sending unit (for a gauge, not for a light) that has the right thread for the port in the block of a Dauntless above the oil pump?

    This one is 1/8" NPT 27, which is too fine. I could make it work with an adapter but first I wanted to see if there's an off the shelf part that works.
     
New Posts