1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ignition Switch

Discussion in 'Early CJ5 and CJ6 Tech' started by Brown, Sep 7, 2019.

  1. Sep 24, 2019
    Brown

    Brown New Member

    Medford Oregon
    Joined:
    Sep 7, 2019
    Messages:
    25
    (y)(y)(y)
     
  2. Sep 25, 2019
    liquids

    liquids Old Member

    Detroit-ish
    Joined:
    Apr 15, 2008
    Messages:
    63
    Lemme change tack here ... where can I get an original or oem snugger-upper nut?

    Regarding the switch ... I rewired with the EZ harness a few years ago. When I was on the switch it had all the terminals in the right places. Could have been original or oem replacement. Of course, my signature says i suspect it's one of my short locations, so I may be getting another one anyway.
     
  3. Sep 29, 2019
    tcfeet

    tcfeet Member

    east of west,...
    Joined:
    May 30, 2009
    Messages:
    352
    I replaced my switch and it has a metal "lok nut" behind the round face nut.. The lok-nut goes on the back side of the dash panel..and the round
    nut goes on the face side..
     
  4. Sep 29, 2019
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    873
    Here's what the original switch looked like (left photo is from the 1966 Jeep Universal Parts List). It was made by Pollak, and had a metal neck and body. The rear portion with the connectors was bakelite or thermoplastic.

    [​IMG]
     
    Last edited: Sep 30, 2019
  5. Sep 30, 2019
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    Welcome from Michigan, Detroit area,I will send you an alloy nut from my old switch if that will help you. I replaced mine it was worn out, the key would fall out while running. I am going up to my cabin, where my Jeep is, and I will bring back my old switch if you want the front nut. It will be about a week before I come back.
     
  6. Sep 30, 2019
    Brown

    Brown New Member

    Medford Oregon
    Joined:
    Sep 7, 2019
    Messages:
    25
    That's the one I have !
     
  7. Sep 30, 2019
    liquids

    liquids Old Member

    Detroit-ish
    Joined:
    Apr 15, 2008
    Messages:
    63
    I'd really appreciate that. Thanks. Lemme know when you're back and we can compare cabin Jeeps over a beer. Where's your cabin, btw? My CJ5 lives at my father-in-law's cottage near Pinconning. (My orange 2018 JLU is out front.)
     
  8. Sep 30, 2019
    liquids

    liquids Old Member

    Detroit-ish
    Joined:
    Apr 15, 2008
    Messages:
    63
    Looking at this may explain my unique dash nut. I think my switch is a different shape. The fat part of the body is longer on mine if I'm remembering it correctly, and the narrow neck is shorter. It was probably aftermarket from I don't know when.
     
  9. Oct 1, 2019
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    My Place is in Atlanta, M33 and M32, we are in a club 13 miles North of Atlanta, 11,000 acers of hunting land, lots of forest viewing, and wild life. I will PM you my Phone Number.
     
    liquids likes this.
  10. Oct 1, 2019
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    There are Pollack (and generic universal) that are the same basic shape, only with a shorter "neck". Also, '65 should have screw terminals on the back, where '66-up should have spade lug connections. Most any of the aftermarket switches are fine. An original Pollack switch will have a chrome retaining nut with wrench flats, and the generics usually have an alumunum knurled nut. Either will work fine.
    -Donny
     
    liquids likes this.
  11. Oct 1, 2019
    liquids

    liquids Old Member

    Detroit-ish
    Joined:
    Apr 15, 2008
    Messages:
    63
    My Jeep was raised near there. Brought home as a baby by my in-laws' family to the Hardwoods on the west side of Hubbard Lake. It spent 40 years there working and then watching as new baby Jeeps took over all of its jobs. Ten years ago I got it. It needs some joint replacements but it's got a strong heart and brain (aka wiring).
     
  12. Oct 8, 2019
    Brown

    Brown New Member

    Medford Oregon
    Joined:
    Sep 7, 2019
    Messages:
    25
    Have used a marine ignition switch?
    How many positions would you use for the 65 Cj5?
    I see some with 4 positions,accessory,off-run-start!
     
  13. Oct 8, 2019
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    873
    The original CJ-5 ignition switches have 4 positions. From left to right those are Accessory - Off - On - Start.
     
  14. Oct 8, 2019
    Brown

    Brown New Member

    Medford Oregon
    Joined:
    Sep 7, 2019
    Messages:
    25
    Ok, that's what I thought!
    Thank you
     
  15. Oct 10, 2019
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    I am back from my cabin, I have the switch for you, I will call you soon, Rick
     
    liquids likes this.
  16. Oct 11, 2019
    Brown

    Brown New Member

    Medford Oregon
    Joined:
    Sep 7, 2019
    Messages:
    25
    Does the wire form your light switch run to the ignition post on the ignition switch ?
     
New Posts