1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Seat Fitment

Discussion in 'Early CJ5 and CJ6 Tech' started by jeepstar, Mar 12, 2019.

Page 1 of 2
  1. Mar 12, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    since im spending big bucks lately, i figure id just buy new seats since i seen a post here about discount seats.
    morris4x4.com says these wont fit my 62cj5. what gives?

    upload_2019-3-12_8-36-24.png
     
    jeepstar, Mar 12, 2019
    #1
  2. Mar 12, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Maybe the mounting? Personally I don't like high back seats because they reduce visibility.
     
    Glenn, Mar 12, 2019
    #2
  3. Mar 12, 2019
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,420
    holes in seat bottom won't line up with early frames . but anything is possible :whistle:
    fabrication is the key here (y)
     
    Twin2, Mar 12, 2019
    #3
  4. Mar 12, 2019
    GeorgiaFlattie

    GeorgiaFlattie Member

    Canton, GA
    Joined:
    Feb 9, 2017
    Messages:
    69
    They probably won't fit with out modifying the mounts so they're not bolt-in seats.
     
    GeorgiaFlattie, Mar 12, 2019
    #4
  5. Mar 12, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    who makes a direct lowback bolt in? i dont want highback!!!! good catch!
     
    jeepstar, Mar 12, 2019
    #5
  6. Mar 12, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Personally I don't know who does. As indicated fabrication might be in order.
     
    Glenn, Mar 12, 2019
    #6
  7. Mar 12, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    bought 4 just now. 2 for my '70 jeep, and 2 for the wifes '62. fabrication may be in order.



    upload_2019-3-12_9-6-55.png
     
    jeepstar, Mar 12, 2019
    #7
    Twin2 and Glenn like this.
  8. Mar 12, 2019
    ronnie victor

    ronnie victor Member

    raleigh, nc
    Joined:
    Jun 29, 2015
    Messages:
    126
    Jeepster: I looked at website for your seats. The instructions refer to underseat sliders. I don't have sliders for my original seat frames (1966 cj5, f4). Only three bolt hole positions for driver. Do you have seat sliders? Smittybilt instructions make me question whether the seats are truly direct fits for ECJ5s, without PITA installation.

    Let us know after they arrive. I'd like some new buckets too.
     
    ronnie victor, Mar 12, 2019
    #8
  9. Mar 12, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,629
    they are not direct fits...they do work pretty well for intermediate models, but you are going to need some fab work for an early. On mine, the driver side fit fine on the slider and frame for the driver side, but the passenger side with the pivot frame needed some fab. I ended up returning them and using my old seats (new upholstery), but the fab work didn't look to be too hard. Also, remember the smittybilts don't fold, although you can definitely still tip it forward to access the toolbox. I think they are pretty good seats - fabric and seams appeared just a tad cheap compared to the upholstery work i had done, but then again, they cost only a fraction of such work.
     
    FinoCJ, Mar 12, 2019
    #9
  10. Mar 12, 2019
    txtoller

    txtoller Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    May 28, 2014
    Messages:
    977
    Yep, going to have to fab for the passenger side. That is what I am trying to get straight. I had attempted one, but my head was about 4" over the top of the windshield.
     
    txtoller, Mar 12, 2019
    #10
  11. Mar 12, 2019
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,188
    The problem I have with both the Smittybuilt seats is they are very firm foam, and are thick. You sit "on" the seat rather than "in" the seat. This put you several inches higher, and the seat doesn't act as a suspension system like the original seat were. They look right ( at least the lowbacks!), but don't work right, in my opinion.
    -Donny
     
    Keys5a, Mar 12, 2019
    #11
  12. Mar 12, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,600
    Buildflycrash, Mar 12, 2019
    #12
  13. Mar 13, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    they are almost 100 bucks, and to have the dealer ship to me, or i would go to the dealer to pick them up, cost is actually cheaper for the seats i bought from morris, shipped free, directly to my house.
     
    jeepstar, Mar 13, 2019
    #13
    Buildflycrash likes this.
  14. Mar 13, 2019
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,674
    I just checked; they are $200 each now! :shock:

    [​IMG]
     
    ITLKSEZ, Mar 13, 2019
    #14
  15. Mar 13, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    mahindra must have caught wind of us re-purposing them here.

    :sick::sick::sick:
     
    jeepstar, Mar 13, 2019
    #15
    cookieman, rejeep, Twin2 and 1 other person like this.
  16. Mar 13, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,600
    Real glad I got mine when I did. Headrest and built in sliders are a plus.
     
    Buildflycrash, Mar 13, 2019
    #16
  17. Mar 13, 2019
    Beach66Bum

    Beach66Bum 1966 Tuxedo Park Mark IV 2024 Sponsor

    Big Island on...
    Joined:
    Oct 30, 2015
    Messages:
    1,604
    I went with the Bestop lowbacks, TrailmaxII
    I read that the Smittybuilt's sat up higher, which I didn't want. Like mentioned in above posts, the drivers was a direct bolt on replacement. The passenger side I had to make 2 brackets.
     
    Beach66Bum, Mar 13, 2019
    #17
  18. Mar 13, 2019
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Spokane Valley, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,674
    I'm still irritated by this.
     
    ITLKSEZ, Mar 13, 2019
    #18
    cookieman likes this.
  19. Mar 13, 2019
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,158
    Am I the only one who thinks that $200 is a fair price for a complete seat? Especially from an OEM manufacturer?
     
    colojeepguy, Mar 13, 2019
    #19
  20. Mar 13, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,629
    that is because compared to having old seats reupholstered, $200 seems like a good deal. I still think about the amount of jeep money I'd have if I had used the $100 smittybilts instead. Wouldn't have seat heaters, wouldn't have fold and tumble, wouldn't have super nice seats....but would have significantly more money!
     
    FinoCJ, Mar 13, 2019
    #20
Page 1 of 2
New Posts