1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flanged Axle Removal Slide Hammer

Discussion in 'The Tool Shed' started by FinoCJ, Feb 13, 2019.

  1. Feb 13, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
  2. Feb 13, 2019
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Liberty Lake, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,656
    That HF one is the exact kit I got from Advance Auto Parts like 22 years ago for $75, but in a red case. It does that job, plus many more.

    A slide hammer is one of those tools that after you have one, you'll wonder how you got by without it. Just as one example, I regularly use mine to remove backsplash in kitchen and bathroom remodels.

    Edit: If you get that one, I'll post a pic of the attachment I made to get the tapered axle out without the hub attached. :sneak:
     
    FinoCJ likes this.
  3. Feb 13, 2019
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    936
    The HF unit would likely do most everything you would ask of it.

    When I pulled my flanged axle shafts I put the brake drum back on the flanged hub backwards and started all 5 lug nuts just a few threads each then used the drum as the slide hammer. It only took a few "smacks" of the drum to pull the shaft free.
    Oz
     
    FinoCJ likes this.
  4. Feb 13, 2019
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,275
    Do you need a slide hammer for 30 spline flanged shafts? Mine came right out after I unbolted the retaining plate
     
  5. Feb 13, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
    Most examples I have seen use the reverse brake drum method oz describes...but thinking I would get the appropriate tool.
     
  6. Feb 13, 2019
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    936
    I have a slide hammer but lost the axle attachment so that's why I used the drum method.
    I recommend that you get a slide hammer with the attachments that suit you, as mentioned, you will wonder how you got by without it.
    I've pulled pilot bearings, axle shafts (when I had the attachment), seals, sheet metal, pins, etc. Great tool to have in your tool collection.
     
  7. Feb 13, 2019
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Internal outer axle races for bad axle bearings!!!
     
  8. Feb 13, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
    Just jumping ahead a bit...I think I am pretty committed to doing the locker install myself....still debating but local shop estimates around here are pushing to me to give it a run....is there a need to mark the orientation of the axle shaft before removing? In other words, much like most things with splines, when re-installing the shafts the splines can slide back in in any way the fit.
     
  9. Feb 13, 2019
    TIm E

    TIm E Aggressively average

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    683
    FinoCJ likes this.
  10. Feb 14, 2019
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    936
    The splines are evenly spaced around the circumference of the end of the axle shaft, the internal spline of the side gears that they index into will also be similar in its spline configuration, so no need for any particular alignment marks.
    Oz

    Example
    [​IMG]
     
  11. Feb 14, 2019
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Slide hammers are cool.
     
  12. Feb 14, 2019
    TIm E

    TIm E Aggressively average

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    683
    Indeed. If you get one, I assure you that you will use it more than you anticipated. The OTC kit I posted above includes an attachment that threads into/replaces the adjustment screw on a Vice Grip...imagine the possibilities! Neighbor's cow birthing a stuck calf, 5 yr old with a loose tooth, trouble getting the zipper up on your favorite jeans after a big meal...you got it covered! :bananatool:
     
    Last edited: Feb 14, 2019
    tripilio and ITLKSEZ like this.
  13. Feb 14, 2019
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Liberty Lake, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,656
    Holy crap! For two decades I've wondered what that attachment was for! Thank you!
    (Now I know the HF set has this.)
     
    TIm E and 47v6 like this.
New Posts