1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

62 Cj5 Warn Locking Hub

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Sep 19, 2018.

  1. Sep 19, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Does anyone know where can I get parts (bearing, center spline) for these hubs? One of the bearings is shot and the center spline for that one is badly pitted as you can see. Thanks!
    IMG_20180919_073352891_BURST000_COVER_TOP-816x459.jpg IMG_20180919_073359305_BURST001-816x459.jpg IMG_20180919_073409485_BURST001-816x459.jpg
     
  2. Sep 19, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    After sandblasting... IMG_20180919_081615699-459x816.jpg
     
    ojgrsoi likes this.
  3. Sep 19, 2018
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,900
    I don't think you will find the center spline except trying to buy another unit for parts or using yours as parts. Over on the OldWillysForum there has been a discussion including someone that made and now sells the previously unavailable dial O ring. Gaskets for Warn M2 hubs You will also see a guy named Greg who goes by digger that will have some old hubs you can buy.
     
    tripilio likes this.
  4. Sep 19, 2018
    melvinm

    melvinm Member

    Arvada Co. 80003
    Joined:
    Aug 11, 2012
    Messages:
    196
    First picture bottom left the hub looks like it had A Torrington needle bearing , should be A part number on
    the outer edge . should be able to get @ any bearing supply .
     
    tripilio likes this.
  5. Sep 19, 2018
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    These hubs come up frequently on eBay, both in singles and pairs. They are one of the more common styles.
    -Donny
     
    tripilio likes this.
  6. Sep 19, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    It does have a Torrington, good eye! The problem is that it was really chewed up and illegible. I looked at the other one that is ins better shape and I found the trade number. Is a Torrington b-228.
     
  7. Sep 19, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Any specifics to look for to make the search more accurate? I just don't want to order something that looks similar but is not. I know is a 10 spline, but that is all, folks!
     
  8. Sep 19, 2018
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,900
    The thread I posted has it. Jessie at Torque King 4x4 has the O rings, gaskets, bearings, etc. , in a complete kit or standalone. I'm no expert, but that center piece is just going to be a problem if it even works. It is chewed up and rusty. The pins slide up and down that as it engages. I doubt it will be able to slide easily. From the looks of it, it was pretty abused over its life.
     
    tripilio likes this.
  9. Sep 19, 2018
    melvinm

    melvinm Member

    Arvada Co. 80003
    Joined:
    Aug 11, 2012
    Messages:
    196
    Torrington sold out to Koyo still the same number , 1-3/8" ID x 1-5/8" OD x 1/2" Wide .
    Amazon shows them , NAPA or Rockauto May have them also. ( Koyo B228 )
     
    tripilio likes this.
  10. Sep 19, 2018
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Thanks!
     
New Posts