1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Claudia Jean A 1967 CJ6 V6 Dauntless

Discussion in 'Builds and Fabricators Forum' started by jwmckenzie, Mar 25, 2012.

  1. Mar 25, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Here is the first encounter with my 67 CJ6. She came from Colorado Springs. My brother picked her up and we shipped her to New England. The plan is a full restoration back to the orginal Jeep Kaiser built.

    [​IMG]

    By night fall we had her prettly well cleaned out.

    [​IMG]
     
    BobH likes this.
  2. Mar 25, 2012
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    Igot red x instead of pics............looking forward to your build thread
    Jim
     
  3. Mar 25, 2012
    Im a doughball

    Im a doughball Member

    Oregon City
    Joined:
    Jan 8, 2011
    Messages:
    207

    x2 :)
     
  4. Mar 26, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    I don't have permissions for attachments, so until I figure it out sorry no pics. :( Will try to figure it out soon and will catch up on pics.

    The tub, hood, grill, and fenders are off to the sandblaster. Pulled the transmission, T90, I will be able to reuse the case and the drain plug, but nothing else. Dirt and Water aren't good lubricants. The transfer case, Dana 18, and WARN overdrive look great, thank God for the sealed bearing between the trans and Xfer case. Pulled the motor this morning and the clutch is toast. The frame will go to the sandblasters later this week.
     
  5. Mar 27, 2012
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    we have to link to photobucket or something similar
    then copy & paste the image's link options

    It is one of the sacrifices to be a free site
     
  6. Mar 27, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Here are the first pics. Claudia Jean gets delivered

    [​IMG]

    Day 1: Stripped Down

    [​IMG]

    [​IMG]
     
  7. Mar 27, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Day 7: Getting ready for the sandblaster

    [​IMG]

    [​IMG]

    [​IMG]

    Cut out the obvious rust and we will be ready to go. I am sure more cancer will appear after the blasting.
     
  8. Mar 28, 2012
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,231
    Looks like fun. How was your shipping experience?
     
  9. Mar 28, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Day 12: We turned her over and started cutting out the rust. Not bad for a 45 year old sheetmetal.

    The rear tail light panels

    [​IMG]

    [​IMG]

    RHS behind the front seat

    [​IMG]

    Behind the spare tire mount

    [​IMG]

    Also had some rotted out "hat channel" under the floor boards. No pics. Feel like a new parent with the camera.

    Jon.
     
  10. Mar 28, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Thanks, Shipping was easy. I picked a broker out of NC, once I asked for quotes, on-line, the e-mails started from everywhere, maybe 10 brokers. Picked the cheapest 3 and talked with them. The truck was out of AZ, he told me he makes the trip across the US 26 times a year.
     
  11. Mar 28, 2012
    86cj7

    86cj7 New Member

    Joined:
    Dec 15, 2009
    Messages:
    35
    where in boston are you i am from weymouth
     
  12. Mar 28, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    North Andover, did I talk to you about a T90 column shifter?
     
  13. Mar 28, 2012
    Jobhater

    Jobhater A man without a Jeep

    Colorado Springs, CO
    Joined:
    May 27, 2007
    Messages:
    108
    I'm from Colorado Springs and think I saw that CJ-6 for sale. Congrats on your purchase. I'm glad to see it went to someone who will take care of it.
    I can't wait to see more of this build. Good luck!
     
  14. Mar 29, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    Likely the Same Jeep. Here is the Pic that was on Craiglist.

    [​IMG]
     
  15. Mar 29, 2012
    technologyteacher

    technologyteacher Member

    Elkin NC
    Joined:
    Oct 12, 2009
    Messages:
    894
    Is the hardtop homemade? I sort of like the look of it. Something a little different about it.
     
  16. Mar 29, 2012
    86cj7

    86cj7 New Member

    Joined:
    Dec 15, 2009
    Messages:
    35
    nope not me but the person who you talked with is my friend matt
     
  17. Mar 29, 2012
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    A great start to your build pretty much rust free by New England standards.
     
  18. Mar 29, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    The Hardtop is a Koenig "Jiffy Cab" Model 620. The PO didn't have the door hinges so had to put the soft top doors on for transit. Looks like a too large "hand-me-down" coat in the pics. Not quite sure what to do with it. I have it for sale on eBay if you wan to look at more pics. If it doesn't sell I will restore it for this Jeep.
     
  19. Mar 30, 2012
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    I would hang on to both those tops, once it's gone... it's gone and you'll want it back.
    A hardtop is nice in the winter, and the soft top for spring/fall, summertime is bikini time.
    having both a hard and soft top for a cj6 is uncommon.
    its not the hardtop that can be broken down to a half cab is it?
     
  20. Mar 30, 2012
    jwmckenzie

    jwmckenzie Sponsor

    Boston, MA
    Joined:
    Mar 16, 2012
    Messages:
    568
    I wil hang on to it unless some one really wants it. It doesn't break down to a half cab. I wish it was a half cab, that would be my preference for a hard top on this jeep.

    My first jeep was a '61 I had 30 some years ago. In the summer time I would "roll-up" the sides and back of the soft top, take the doors off and it was a great summer vehicle.
     
    Chuck likes this.
New Posts