Tow hook / D-ring mounting on rear of M416

[sac13]

Any suggestions on how to mount a couple D-rings or tow hooks on the back of M416?

Also, any reason (if mounted correctly) I couldn't pull my whole rig backwards if necessary by the D-rings / tow hooks on the back of the trailer while it's still attached or pull someone out from the trailer D-rings? I'm sure they would need to be mounted VERY solid. Any ideas?
I don't want to dis-connect the trailer and try and move it out of the way on a tight trail.

Thanks!

[Robert Bills]

Any suggestions on how to mount a couple D-rings or tow hooks on the back of M416?


I fabricated this assembly to add a 2" receiver tube to the rear of my Bantam. More versatile than D-rings as I can use a shackle for recovery or mount a bike rack, etc.

http://www.surfacezero.com/g503/data/924/medium/HPIM0157.JPG


The assembly bolts to the frame and crossmembers, with triangulated braces for strength and to prevent a pull from twisting the frame.

[sac13]

That's a great idea and good point about using the receiver for other things. Do you happen to have pics unistalled that I could use as a guide to make one?

[Boyink]

I've a similar setup on my trailer - just welded in since the frame is not original and much heavier. It comes in handy for bike racks, etc.

[Robert Bills]

Sorry, that's the only photo I have.